ESI Waveterminal 192L - Manual (Page 6)

ESI Waveterminal 192
7
6. UDMA66/100 7200rpm hard disk drive
2. Preparation for hardware installation
Waveterminal 192X or 192L PCI card and other components in the computer can be
easily damaged by electrical shock. You need to use an anti-static device that can
discharge the static electricity of your body to avoid potential static damage to the cards.
1. Waveterminal 192X or 192L PCI card is placed into the anti static plastic pouch
as it is packaged. Do not open the pouch before you install the card.
2. Turn off the computer power and remove the power cable from your computer
power supply.
3. Remove the computer cover. Make sure that you have an available PCI slot in
your motherboard to install Waveterminal 192X or 192L. Please, refer to your
computer user’s manual to remove the cover.
4. To avoid possible static shock to the computer parts, discharge it by touching
the computer case or something grounded. We recommend you to use an anti-
static device such as an anti-static wrist band.