ESI Waveterminal 192L - Manual (Page 38)

ESI Waveterminal 192
39
1. Coaxial
When you connect WT192L with MI/ODI/O, you can select MI/ODI/O’s Coaxial Input
as digital input.
2. Optical
When you connect WT192L with MI/ODI/O, you can select MI/ODI/O’s Optical Input
as digital input.
3. MONITOR & H.P
When you select this button, Digital Input signals goes to Output 1,2. Also Output 5,6 is
changed to Headphone out.
You can monitor Digital input signal in real-time. You can monitor same signal out of
Output 1,2 through Output 5,6.
6. Digital Type –Digital format selector
When you use WT192L with MI/ODI/O together, this is where you to set various digital
format.
1. Pro (IEC 958 Type 1)
WT192L’s digital in/out format is AES/EBU.
2. Consumer (IEC 958 Type II)
WT192L’s digital in/out format is S/PDIF.
7. MIC
This is where you to set 192L’s MIC Input. You can adjust level or select Phantom
power.
1. Level fader
You can adjust level of MIC input.
2. +12V
When you use Condenser Microphone, you need phantom power.
WT192L provides +12V Phantom power.
If you use Dynamic Microphone, please turn off this button.
8. Ana. IN/ Dig. IN – Input Level meter