ESI Waveterminal 192L - Manual (Page 52)

ESI Waveterminal 192
53
10. Specifications
1. Waveterminal 192X
1. Input type : Analog Line_In - 2 Channel (1/4" TRS phone Plug)
2. Output Type : Analog Out - 6 Channel(3 Stereo 1/4" TRS phone Plug)
Digital Out - Optical Out (TOS-LINK)
3. Input LEVEL : +4dBu balanced, +4dBu Nominal, +22.5dBu Max
4. Output LEVEL : +4dBu Unbalanced, +4dBu Nominal, +16.5dBu Max
5. Input Impedance : 10K ohm
6. Output Impedance : 100 ohm
7. Output Attenuation : Digital -127dB ~ 0dB, 0.5dB Step Size(with Mute)
8. A/D Spec
1) Sampling Rate : 16, 22, 24, 32, 44.1, 48, 88.2, 96, 176.4, 192 KHz
2) Dynamic Range (S/N) : 123dB A-Weighted (Typical)
3) Frequency Response : 20 ~ 21.768KHz (@ fs=48KHz)
4) Resolution : 24 Bits
9. D/A Spec
2) Sampling Rate : 16, 22, 24, 32, 44.1, 48, 88.2, 96, 176.4, 192 KHz
2) Dynamic Range (S/N) : 106dB A-Weighted (Typical)
3) Frequency Response : 20 ~ 21.768KHz (@ fs=48KHz)
4) Resolution : 24 Bits
10. Digital Out Spec
1) Type : Optical connector (TOS-LINK)
2) Format : IEC-958 Consumer(S/PDIF), IEC-958
Professional(AES/EBU)
3) Sample Rate : 16, 22, 24, 32, 44.1, 48, 88.2, 96 kHz
4) Resolution : 24 Bits
11. Headphone Amp Spec
1) Output Power : 60mW Max
2) Signal to Noise Ratio: 110dB (Typical)
3) (THD+N)/S : -70dB, 0.03% (Typical)