Faronics Anti-Virus Enterprise - Manual (Page 38)

Faronics Anti-Virus User Guide
38
|
Using Faronics Anti-Virus
• Scanning node>Schedule pane - Specify the following settings:
Quick Scan:
— Enable Quick Scan - select the check box to enable Quick Scan.
— Start - specify the start time.
— Stop - specify the end time. The maximum duration between the Start time and Stop time
is 23.59 hours. The scan ends if all the files are scanned before the Stop time. If the scan is
not complete before the Stop time, it is aborted at the Stop time. Alternatively, select When
scan is complete to ensure that scan is completed.
— Days - select the days when the scheduled Quick Scan will take place.
Deep Scan:
— Enable Deep scan- select the check box to enable Deep Scan.
— Start - specify the start time.
— Stop - specify the end time. The maximum duration between the Start time and Stop time
is 23.59 hours. The scan ends if all the files are scanned before the Stop time. If the scan is
not complete before the Stop time, it is aborted at the Stop time. Alternatively, select When
scan is complete to ensure that scan is completed.
— Days - select the days when the scheduled Deep Scan will take place.
Options:
— Randomize scheduled scan start times by x minutes - specify the number of minutes. The
scheduled scan start time is randomized to reduce the impact on network traffic. Faronics
Anti-Virus reports to Faronics Core when the scanning starts. This might impact the
network traffic if the scan for multiple systems start at the same time.