Faronics Anti-Executable Enterprise/Server - Manual (Page 49)

Status Tab
|
49
Anti-Executable Enterprise User Guide
Use the Remind Me after every check box to have Anti-Executable provide reminders on a
workstation to enable Protection if Protection is disabled.
Anti-Executable Maintenance Mode
Select Maintenance Mode and click Apply to run Anti-Executable in Maintenance Mode. When in
Maintenance Mode, new executable files added or modified are automatically added to the
Execution Control List. To exit Maintenance Mode, select Enable or Disable.
If Enable is selected, the changes are recorded by Anti-Executable. If Disable is selected, the
changes are not recorded by Anti-Executable.
Retrieving settings from Faronics Core Console
The Status pane retrieves and displays all the settings of a single workstation. When a single
workstation is selected and Anti-Executable is launched via Faronics Core Console, the
workstation settings are retrieved automatically.
The Disable Keyboard and Mouse check box is available only while accessing
Anti-Executable via Faronics Core Console. This is to ensure that a computer that
has its keyboard and mouse disabled can still be managed remotely via Faronics
Core Console.
Adequate time required for Windows Updates must be provided while running in
Maintenance Mode.
If the computer is running in Maintenance Mode, and the Protection is disabled,
the changes made to the workstation during Maintenance Mode are not added to
the Execution Control List.