Flowserve S-series PolyChem - Manual (Page 50)

USER INSTRUCTIONS POLYCHEM S-SERIES ENGLISH 71569207 11-08
Page 50 of 52
flowserve.com
9 CERTIFICATION
Certificates, determined from the contract requirements
are provided with these instructions where applicable.
Examples are certificates for CE marking and ATEX
marking etc. If required, copies of other certificates sent
separately to the Purchaser should be obtained from
Purchaser for retention with these User Instructions.
10 OTHER RELEVANT
DOCUMENTATION AND MANUALS
10.1 Supplementary User Instructions
Supplementary instructions such as for a driver,
instrumentation, controller, seals, sealant systems etc
are provided as separate documents in their original
format. If further copies of these are required they
should be obtained from the supplier for retention
with these User Instructions.
10.2 Change notes
If any changes, agreed with Flowserve, are made to
the product after it is supplied, a record of the details
should be maintained with these User Instructions.
10.3 Additional sources of information
The following are excellent sources for additional
information on Flowserve PolyChem S-series pumps,
and centrifugal pumps in general.
Pump Engineering Manual
R.E. Syska, J.R. Birk,
Flowserve Corporation, Dayton, Ohio, 1980.
Specification for Horizontal End Suction Centrifugal
Pumps for Chemical Process, ASME B73.1
The American Society of Mechanical Engineers,
New York, NY.
End-suction centrifugal pumps (rating 16 bar) –
Designation, nominal duty point and dimensions, ISO
2858
International Organization for Standardization.
American National Standard for Centrifugal Pumps
for Nomenclature, Definitions, Design and Application
(ANSI/HI 1.1-1.3)
Hydraulic Institute, 9 Sylvan Way, Parsippany,
New Jersey 07054-3802.
Technical specification for centrifugal pumps – Class
II, ISO 5199
International Organization for Standardization
American National Standard for Centrifugal Pumps for
Installation, Operation, and Maintenance (ANSI/HI 1.4)
Hydraulic Institute, 9 Sylvan Way, Parsippany,
New Jersey 07054-3802.
Flowserve PolyChem Sales Bulletin PS-10-17.
RESP73H Application of ASME B73.1-1991,
Specification for Horizontal End Suction Centrifugal
Pumps for Chemical Process, Process Industries
Practices
Construction Industry Institute, The University of
Texas at Austin, 3208 Red River Street, Suite 300,
Austin, Texas 78705.
Pump Handbook
2nd edition, Igor J. Karassik et al, McGraw-Hill, Inc.,
New York, NY, 1986.
Centrifugal Pump Sourcebook
John W. Dufour and William E. Nelson,
McGraw-Hill, Inc., New York, NY, 1993.
Pumping Manual, 9th edition
T.C. Dickenson, Elsevier Advanced Technology,
Kidlington, United Kingdom, 1995.