Flowserve 3400IQ Digital Positioner - Manual (Page 136)

Logix 3400IQ Digital Positioner FCD LGENIM3402-00 – 0/07
3
Table 11.4 Logix 3400IQ-011 : PID-011 (PID)
Configuration File Data Comments
(21) SP_HI_LIM = 100
(22) SP_LO_LIM = 0
(23) GAIN = 0
(24) RESET = 5Sec
(25) BAL_TIME = 0Sec
(26) RATE = 0Sec
(27) BKCAL_IN =
STATUS = Good_Cascade::NonSpecific:NotLimited
VALUE = 0
(28) OUT_HI_LIM = 100
(29) OUT_LO_LIM = 0
(30) BKCAL_HYS = 0.5%
(31) BKCAL_OUT =
STATUS = Good_Cascade::NonSpecific:NotLimited
VALUE = 0
(32) RCAS_IN =
STATUS = Good_Cascade::NonSpecific:NotLimited
VALUE = 0
(33) ROUT_IN =
STATUS = Good_Cascade::NonSpecific:NotLimited
VALUE = 0
(34) SHED_OPT = NormalShed_NormalReturn
Initialized value = uninitialized, must be set to a valid value
(35) RCAS_OUT =
STATUS = Good_Cascade::NotInvited:Constant
VALUE = 0
(36) ROUT_OUT =
STATUS = Good_Cascade::NotInvited:LowLimited
VALUE = 0
(37) TRK_SCALE =
EU_100 = 100
EU_0 = 0
UNITS_INDEX = 0X0000
DECIMAL = 0X00
(38) TRK_IN_D =
STATUS = Bad::OutOfService:NotLimited
VALUE = Discrete State 0
(39) TRK_VAL =
STATUS = Bad::OutOfService:NotLimited
VALUE = 0
(40) FF_VAL =
STATUS = Bad::OutOfService:NotLimited
VALUE = 0