Front panel – Fluke Biomedical 601PRO XL User Manual
Page 22

6 0 1 P R O S E R I E S
X L
1 - 8
A
B
C
D
E
F
baw154f.eps
Figure 1-2: 601PRO Front Panel Illustration
Front Panel
A
Applied Part
Terminal
The jacks allow direct connection to
banana jacks, or 4mm-to-alligator
adapters provided.
B
Red Input
Terminal
Single test lead connection.
C
Black Input
Terminal
Used for dual lead testing in combination
with red test lead.
D Green
Input
Terminal
Protective Earth of Device Under Test.
E Power
Outlet Allows standard power plug connection
of the Device Under Test. 120V @ 15A
or 240V @ 15A maximum.
F
On-Off Switch /
Circuit Breaker
Power up the 601PRO, I=ON, 0=OFF;
built-in ISA circuit breaker.
Note: To power up the 601PRO, place
the index finger on the rocker switch and
use a rolling motion to push from "OFF"
to "ON." Do NOT forcefully push or
snap the rocker switch. This may cause
the unit to shut off.