Fluke Biomedical 601PRO XL - Manual (Page 29)

S E T T I N G U P T H E 6 0 1 P R O
2 - 5
5. Activating the Beeper
To activate/deactivate the beeper:
• From the 601PRO MAIN MENU , press SYSTEM SETUP to access the
Select Setup Function menu. Press *MORE until the following menu is
displayed, then press BEEPER :
baw012f.eps
• Press a SOFT KEY to select ON or OFF at the Key and Error Beeper
menu:
baw025f.eps
Selecting OFF will silence the beep that sounds when a key is pressed or when
an error occurs. Selecting OFF will not disable the beeper during lead
calibration or when performing tests using the beeper as a warning.
Default Setting: ON
• Press enter to save the settings and return to the Select Setup Function
menu. Press previous to return to the MAIN MENU .