Fluke Biomedical 601PRO XL - Manual (Page 99)

T E S T R E C O R D S
5 - 5
Printing a Header
Printing a header before starting a test allows the technician to log important
information about the device to be tested. To print a header in Manual Mode , press
print header . A header is automatically created in Auto and Step Modes . The
header contains the following information:
An example of an Auto or Step mode printout sent to the internal printer is displayed
on the following page. A header is automatically placed before test results. An
example of a full-page external report is provided on page 5-7.
FLUKE BIOMEDICAL
05/11/00 10:18
CONTROL#:_____________________
PROCEDURE ID:_________________
LOCATION:______________________
DEVICE TYPE:___________________
MANUFACTURER:________________
SERIAL #:_______________________
TECHNICIAN:____________________
601PRO#: 121569
CLASS: II TYPE: BF
AP LEADS: 5
(RA-BF) (RL-BF) (LA-BF)
(LL-BF) (V-BF)