FSR DV-HMSW4K-88 Matrix - Manual (Page 13)

13
version information.
MATRIX ROUTING
MANUAL ROUTING:
To select and route an input to an output press the desired INPUT SELECT button
and then an OUTPUT SELECT (or vice versa) button to specify a route. The
DV-HMSW4K-88 will switch and the current route status will be shown on the LCD
Display.
1T1 (one to one) ROUTING:
The 1T1 button, when pressed, will automatically route each input to its
respective output. IE: Input 1 to Output 1, Input 2 to Output 2 and so on.
ALL ROUTING:
The ALL button, when pressed, will automatically route a selected input to all of the
outputs.
To use the "ALL" function:
1. Press the ALL button. The DV-HMSW4K-88 will prompt for an INPUT
2. Select the desired INPUT to be routed to "ALL" outputs.
3. Press the ENTER button. The ALL route will be stored and displayed on
the LCD display.