Gasboy Atlas Fuel Systems Owner Manual - Manual (Page 40)

The Atlas Fuel System Programming 8800 Models
Page 36 MDE-4363F Atlas™ Fuel Systems Owner’s Manual · September 2011
Command Code 7: Program Totals Input
• Press 7 and then press ENTER.
• Select Side (1 or 2) and then press ENTER.
• Select Grace # and then press ENTER.
• Press $ Total.
• Enter money total and then press ENTER.
(Repeat for other side and grade)
Press Volume Total and repeat above procedure for volume totals.
Command Code 8: Display Version Number
Enter 8 and then press ENTER.
Select Software Option and then press ENTER where
1= Pump Controller
3= Customer Programmable Preset
Command Code 18 FC 1: Volume Pulse per Unit Programming
1 = 1
2 = 10 (default)
3 = 50
4 = 100
5 = 1000
Command Code 18 FC 2: Volume Pulse Width Programming
1 = 0.5ms
2 = 1.0ms
3 = 2.0ms
4 = 4.0ms (default)
5 = 17.0ms
6 = 19.0.ms
7 = 26.0ms
8 = 150.0ms