Maintenance and troubleshooting – Gasboy Electric Keytrol User Manual
Page 33

03/28/03
6-1
Section 6
MAINTENANCE AND TROUBLESHOOTING
MAINTENANCE OF YOUR ELECTRIC KEYTROL
Procedures requiring disassembly of portions of the Electric Keytrol, pump, or remote
dispenser must be performed by qualified service personnel.
WARNING:
To reduce the risk of electrical shock when servicing, turn off all power to the
Electric Keytrol, pump/remote dispenser. In submersible pump applications turn
off power to the submersible pump and any other remote dispensers which use
that submersible pump. AC power can feed back into a shut-off remote dispenser
when dispensers share a common submersible pump or starter relay. Always
turn off all power to the remote dispenser and submerged pumps at the master
panel and close any impact valve before performing any maintenance or service
to the remote dispenser, including the changing of any fuel filters or strainers.
Also block islands so no vehicles can pull up to the remote dispenser when the
dispenser is being worked on.
Demand Competent Service
If your Electric Keytrol should stop or fail to operate properly, don't depend upon the repair service
of a general mechanic unless he is thoroughly familiar with the mechanism. Experience shows
that the repair results will be much more satisfactory if you demand the service of a competent
representative of the pump manufacturer. GASBOY has a distributor network which services fuel
dispensing and management systems in every section of the country.
Use Authorized Parts
Should excessive wear, rust, or corrosion of parts cause inefficient operation, it is always best to
replace them immediately; but if you want the best results and continuity of the Underwriters' Label
on your pump, be sure they are new authorized service parts supplied by GASBOY. Every part of
a pump or remote dispenser is carefully designed for a particular purpose. If it is replaced by an
incorrect or substandard substitute, operation will be unsatisfactory.
Operate with Reasonable Care
Like any machine, an Electric Keytrol that is operated with reasonable care will last longer and
give better service. Abuse should be avoided. The time and care given to your Electric Keytrol
will be returned to you in the form of dependable service.
Preserve the Electric Keytrol Cabinet
Nearly all Electric Keytrol’s are installed outdoors where their surfaces are subjected to the action
of the weather. As a result, it is necessary to give the finish a reasonable amount of care if an
attractive appearance is to be maintained.