Gasboy M14142K001 - Manual

MDE-5163A Boot Switch Kit (M14142K001) Installation Instructions · August 2014 Page 1
Introduction
Purpose
This manual provides instructions to install the Boot Switch Kit (M14142K001) in Gasboy ®
9800A/2600A/215A/7215A front-load model dispensers.
Table of Contents
Topic Page
Introduction 1
Important Safety Information 3
Installing Boot Switch Kit (M14142K001) 5
Required Tools and Materials
Following tools and materials are required to install the Boot Switch Kit:
• Nut Driver
• Heat Gun
• Thread Lock
Parts List
Following table lists parts included in the Boot Switch Kit:
Item Description Part Number Quantity
1 Extension Spring 064400 1
2 Nozzle Boot Bearing 064401 2
3 Nozzle Bracket Lock Bushing M14068B001 1
4 Flat Washer (Spacer) K65235-33 1
5 Cotter Pin K02124 1
6 Reed Switch and Bracket Assembly M14143A001 1
7 Lever Shaft Assembly M14144A001 1
8 Magnet and Bracket Assembly M14145A001 1
MDE-5163A
Boot Switch Kit (M14142K001)
Installation Instructions
August 2014