Gasboy CFN Series SCII Installation Manual - Manual (Page 21)

CFN Series System
2-14 05/28/03
PROFIT POINT CONSOLE
Description
The Profit Point console is used to initiate and monitor fuel and non-fuel retail (convenience) sales
at the fuel island. The unit is controlled by a microprocessor and communicates to the Site
Controller II through a RS-485 to RS-232 converter.
Each Profit Point console can control up to 32 pumps or remote dispensers, although 16 pumps is
the factory default. A 9-inch (or optional 14-inch) easy-read, black and white, VGA, CRT screen is
used to provide the operator with current transaction information and pump status regarding the
site. The keyboard consists of 112 full-travel programmable keys, with 102 keys being the factory
default. An ABA track 2 magnetic stripe reader allows you to accept credit, debit and proprietary
card purchases right at the keyboard. Speakers provide audio feedback to the operator, such as
when a sale becomes payable, or a pump is taken offhook.
A cash drawer is used for storage of cash at the site and a customer display allows you to display
console sales so they are visible to the customer. The cash drawer and customer display are
connected to the Profit Point through the POS Distribution Box (D-Box).
Available options for the Profit Point console include a standalone receipt printer, for generating
receipts at the console; a PIN (personal identification number) pad for private, individual, PIN
entry; and a scanner, which provides quick, accurate entry of merchandise sales and also allows
entry of new UPC codes by scanning, thus eliminating time-consuming key entry.
Location
The Profit Point console and options
should be located in an office-type
environment. The unit must be
located in an area protected from
direct contact with the weather. Do
not install over a hazardous
location. The unit is designed for an
operating temperature of 40
o F to
100 o F with a relative humidity of 5%
to 95% non-condensing. The
operative temperature range for the
optional standalone receipt printer is
40
o F to 104 o F. While it is
customary for the Profit Point to be
positioned close to the site
controller, you can locate it in a
location up to 1000 feet away by
using supplemental equipment.
See Remote Profit Point Console
Wiring in Section 3.
NOTE: Monitor dimensions shown
are for the standard 9-inch monitor.
For the optional 14-inch monitor, the
dimensions are W=14-1/2, H=14-
3/4, and D=16-3/4.