Gasboy Fuel Point Vehicle Module - Manual (Page 31)

MDE-4524A Vehicle Module Programming Manual· May 2006 Page 5-3
General Programmer Operation Operation
Entering Numeric Data
On the keypad, press the number that you want to enter into the field. If there are multiple
digits within a field, the cursor automatically advances to the next position. After all digits
have been entered, press ENTER to advance to the next field. If you press ENTER before all
data has been entered, it will fill the un-entered most significant digits with zeros, then
advance to the next field. For example, to enter the number 16 into a 4-digit field, type 1, 6,
ENTER. The data will be stored as 0016.
1
MNO
6
YES
ENTER
ENTER VEHICLE:
1???
ENTER VEHICLE:
16??
ENTER LIMIT:
5_
Entering Alphanumeric Data
On the keypad, the keys 2 through 0 have letters above the numbers. While entering data into
an alphanumeric field, the first time you press a number, it shows that number, but the cursor
does not advance to the next position. The second time you press the same number, it shows
the first letter marked above the number. Pressing it again shows the second letter, and
pressing it a fourth time shows the third letter. An alphanumeric field can have any
combination of letters and numbers. In an alphanumeric field, you must press the ENTER key
to advance the cursor. After all characters have been entered, press ENTER to advance to the
next field. If you press ENTER before all data has been entered, it will fill the un-entered most
significant characters with zeros, then advance to the next field. For example, to enter the
string A37R into a six character field, type:
2, 2, ENTER, 3, ENTER, 7, ENTER, 7, 7, 7, ENTER, ENTER.
The data is stored as 00A37R.