Gasboy Fuel Truck Controller - Manual (Page 69)

Fuel Truck Controller Manual 63
Figure ‎4-5. SiteOmat – Buses Dialog Box
13. Set the new bus as follows:
a. Enter the Bus Name
b. Select OrTC from the Frame drop down-list
c. Select the Serial radio button
d. Select COM2 from the Serial COM drop-down list
e. Select the following serial communication parameters:
 Parity: NONE
 Data bits: 8
 Stop bits: 1
14. Click New to save the settings and exit the dialog box
15. Select the Printers tab to define the Mobile Printer. The Printers dialog box appears (see
Figure ‎4-6)