Gasboy FHO Pods - Manual (Page 10)

Figure 1-4. Setting the HID Pod in FHO Administration Setup – General Screen
1.7. OPERATION
Please refer to paragraph 2.7
1.8. MAINTENANCE
This section provides general maintenance and troubleshooting instructions for the HID Pod.
1.8.1. Changing the HID Pod Default IP Address
In order to change the HID Pod IP address, as it may be required, proceed as follows:
1. Power ON the unit
2. Connect the HID Pod to a PC (LAN Connection)
3. Set the PC's IP address to the HID default IP
4. Open the Web browser, and enter the default IP address of the HID Pod as it appears on the
label on the unit's rear panel. The Setup Main Screen is displayed (see Figure 1-5)
8 FHO Pods User’s Manual