Figure 1-7.– fortcom web site – save setup screen – Gasboy FHO Pods User Manual
Page 12
10
FHO Pods User’s Manual
S
b
e
W
M
O
C
t
r
o
F
–
.
7
-
1
e
r
u
g
i
F
ite – Ethernet Setup Screen
8. Enter the new IP Address
9. Click on the Submit button to save the changes
10. Select the Save Setup tab. The following screen appears (see
Figure 1-8.– FortCOM Web Site – Save Setup Screen
11. Click on Apply to apply the changes
12. The website displays a confirmation message. Click OK. The data is saved into the Flash
memory chip
13. Once the Flash memory has successfully stored the setup and configuration data, a pop-up
message requires restarting the system. This procedure is recommended. Click OK
14. Set newly changed IP address in FHO (refer to paragraph 6
)
N
N
O
O
T
T
E
E
It is highly recommended to replace the existing IP
Address label with a new label indicating the current
IP Address
.