GBS Elektronik MCA-527 Firmware Commands - Manual (Page 40)

MCA527
Command name CMD_QUERY_STATE527_EX (Continuation)
Result data array
Byte offset 56 Extension port counter 1 unsigned long
Byte offset 60 Extension port counter 1 cps unsigned long
Byte offset 64 Extension port counter 1 of previous sweep unsigned long
Byte offset 68 Extension port counter 2 unsigned long
Byte offset 72 Extension port counter 2 cps unsigned long
Byte offset 76 Extension port counter 2 of previous sweep unsigned long
Byte offset 80 RS232 transfer buffer byte count unsigned short
Byte offset 82 Fractional digits 45 of the real time [msec] unsigned short The integer part of the real time is
returned by CMD_QUERY_STATE, byte
offset 20.
Byte offset 84 PUR counter of previous sweep unsigned long
Byte offset 88 Trigger filter availability flags 46 unsigned long Bit n = 1 means trigger filter n is
available.
Byte offset 92 Trigger filter value1 [ * 0.00006103515625] short According the selected trigger
filter:
(value2; value1)
(value2; 0; value1)
(value1; value2; value1)
(value1; 0; value2; 0; value1)
Byte offset 94 Trigger filter value2 [ * 0.00006103515625] short
Byte offset 96 TTL low level [ * 0.1 V] unsigned char
Byte offset 97 TTL high level [ * 0.1 V] unsigned char
Byte offset 98 Trigger level for automatic threshold calculation
for direct input [ * 0.0625] unsigned short 80 … 1600
Byte offset 100 ADC overflows per second 47 unsigned long
Byte offset 104 ADC sampling rate [kilohertz] 47 unsigned short
Byte offset 106 Command flag and parameters 8 bytes
Byte offset 114 File size 48 corresponding to setup [kilobytes] 2 bytes
Byte offset 116 Total microSD card memory size [kilobytes] 4 bytes
Byte offset 120 Free microSD card memory size [kilobytes] 49 4 bytes
Byte offset 124 File writing state 1 byte 0 = idle, ≠0 = in process
Byte offset 125 Result of last file writing 1 byte -1 = not yet executed
0 = unsuccessful
1 = successful
Byte offset 126 Checksum unsigned short
Byte offset 128 MCA state unsigned short See CMD_QUERY_POWER
Byte offset 130 unused 2 bytes
45 Since firmware version 13.04. If the value is returned during a running measurement, it should be treat with caution. Since the
integer part of the real time is returned by another command, the user must consider the time difference between the
commands.
46 Since firmware version 12.00.
47 Since firmware version 13.04.
48 This is the needed size on the microSD card.
49 This is the free microSD card memory size minus the size of one cluster that is reserved for a potential expansion of the
directory.
40