Ivoclar Vivadent IPS e.max CAD-on - Manual (Page 23)

23
CAM process with Sirona inLab ® MC XL
The milling process of the IPS e.max ZirCAD framework and the
IPS e.max CAD veneering structure takes place in a Sirona InLab MC XL
milling unit. Please refer to Sirona's recommendations with regard to
suitable milling tools.
For the milling process in a Sirona inLab MC XL unit, please observe the
Ivoclar Vivadent recommendations with regard to the Dentatec milling
additive.
Milled IPS e.max ZirCAD framework Milled IPS e.max CAD veneering structure
CAD/CAM
Pr
ocessing