Ivoclar Vivadent IPS e.max CAD-on - Manual (Page 35)

35
Glass-ceramic
Fusion
Pr
ocess
Check in the articulator with foil at the adjacent teeth or the support pin. If the final occlusal position is achieved,
the IPS e.max ZirCAD framework and the IPS e.max CAD veneering structure have been correctly joined.
Another vibrating process is contraindicated,
as this would result in defects in the fusion area.
Remove residue of IPS e.max CAD Crystall./Connect material from the restoration with a dry
short-haired brush. Joined, cleaned restoration.
Note: Smooth out IPS e.max CAD Crystall./Connect material at the fusion joint.
Basal view: Joined, cleaned restoration.
Note: Smooth out IPS e.max CAD Crystall./Connect material at the fusion joint.
Remove excess IPS e.max CAD Crystall./Connect material with the IPS Spatula.