Ivoclar Vivadent IPS e.max CAD-on User Manual
Page 40
40
Place the restoration including the pins in the centre of the IPS e.max CAD Crystallization Tray.
Do not place the restoration at the periphery of the IPS e.max CAD Crystallization Tray.
Place the restoration on the positioned IPS e.max CAD Crystallization Pins
on the IPS e.max CAD Crystallization Tray.
Characterizations with IPS e.max CAD Crystall./Shades and Stains can be applied to the
unfired glaze.
In the case of bridges, the basal rest area can be characterized with IPS e.max CAD Crystall./
Shades and/or Stains, if required.
Apply some IPS Object Fix Putty or Flow material to the cavity of the restoration to place the
restoration on the IPS e.max CAD Crystallization Pins.
Hold the restoration in place ...
... and apply IPS e.max CAD Crystall./Glaze Paste evenly on the entire outer surface and the
basal side of the bridge pontic.