Ivoclar Vivadent EP3000-G2 - Manual (Page 12)

12
3. Product Description
3.1 Components
The Programat EP 3000/G2
comprises the following
components:
– Furnace base with electronic
controls
– Furnace head with firing
chamber and press drive
– Firing plate
– Cooling tray
– Power cord and hose for
vacuum pump
– Vacuum pump (accessories)
3.2 Hazardous areas and safety equipment
Description of the hazardous areas of the furnace:
3.3 Functional description
The firing/pressing chamber may be heated up to
max. 1200 °C (2192 °F) by means of a heating
element. Furthermore, the firing chamber has
been designed in such a way that a vacuum may
be created with a vacuum pump. The presssure for
the press procedure is generated by a press drive.
The firing/pressing programs are controlled with
the corresponding electronic controls and
software. Moreover, the set and actual tempera-
tures are continuously compared.
3.4 Accessories
(not part of the delivery form)
– Automatic Temperature Checking Set 2 (ATK 2)
– Programat Accessories Set 2 (Programat firing
trays, Silicone Nitride Firing Tray “K”, firing
tongs, Automatic Temperature Checking Set 2)
– Vacuum pump
Description of the safety equipment of the furnace:
Safety equipment Protective effect
Protective conductor Protection from electrical shock
Electrical fuses Protection from electrical shock
Housing and covers Protection from electrical shock, burn hazard and
crushing
Hazardous area Type of risk
Firing chamber Risk of burning
Opening/closing mechanism Risk of crushing
Electrical components Risk of electrical shock