Ivoclar Vivadent EP5000-G2 - Manual (Page 23)

23
5.5.2.3 Save the firing program / firing group on the USB
memory stick
The majority of USB memory
sticks can be used as program
memory. In order to use the USB
memory stick as external
program memory, it has to be
first prepared as a storage
medium. For this purpose, con-
nect the USB memory stick to
the furnace. Subsequently, select
“Prepare USB memory stick as
external program memory” in the program manager. Select /Hard
Disk…/ and start the procedure with Open. The process is completed
when the message for the successful preparation of the USB memory
stick is shown on the display.
All the existing firing programs
(Ivoclar Vivadent programs or
individual programs) of the
furnace can be saved on a
prepared memory stick. Select
Selection – Program manager –
Copy programs and make a
choice using the +/- keys:
• All programs
• Program (copy a single
program)
• Group (copy a single group)
When a USB memory stick is
operational, pressing the
“Home” button results in the
program selection screen being
shown with an additional touch
button for the selection of a USB
memory stick.
5.5.3 Information
The information pages 1 to 4
provide information on the
current software version,
operating hours, calibration
settings and status of the
identified USB devices, such as
printer and USB memory stick.
The information display also
serves to check whether the
Programat furnace has identified
a USB device.
5.5.4 Calibration
By pressing the „Start calibration
program“ touch button, the
program is automatically started.
Please see the notes in
Chapter 7.4.
5.5.5 Special programs
See Chapter 7.3 for detailled information on the Special programs.