Ivoclar Vivadent Bluephase 20i - Manual (Page 15)

19
Warranty /
Procedure in case of repair
The warranty period for Bluephase 20i is 3 years from the
date of purchase (battery 1 year).
Malfunctions resulting from faulty material or manufactur-
ing errors are repaired free of charge during the warranty
period. The warranty does not provide the right to recover
any material or non-material damage other than the ones
mentioned. The apparatus must only be used for the
intended purposes. Any other uses are contraindicated. The
manufacturer does not accept any liability resulting from
misuse and warranty claims cannot be accepted in such
cases. This is particularly valid for:
• damage resulting from improper handling, especially
incorrectly stored batteries (see Technical data: Transpor-
tation and storage conditions).
• damage to components resulting from wear under
standard operating conditions (e.g. battery).
• damage resulting from external influences, e.g. blows,
drop to the floor.
• damage resulting from incorrect set-up or installation.
• damage resulting from connecting the unit to a power
supply, the voltage and frequency of which do not
comply with the ones stated on the rating plate.
• damage resulting from improper repairs or modifications
that have not been carried out by certified Service
Centres.
In case of a claim under warranty, the complete apparatus
(handpiece, charging base, power cord and power pack)
must be returned, carriage paid, to the dealer or directly to
Ivoclar Vivadent, together with the purchase document. Use
the original packaging with the corresponding cardboard
inserts for transportation.
Repair work may only be carried out by a certified Ivoclar
Vivadent Service Center. In case of a defect that cannot be
rectified, please contact your dealer or your local Service
Center (see addresses on the reverse side). A clear descrip-
tion of the defect or the conditions under which the defect
occurred will facilitate locating the problem. Please enclose
this description when returning the apparatus.
Product specifications
Delivery form
1 Charging base, 1 Power cord, 1 Power pack, 1 Handpiece 1 Battery (Li-Po),
1 10>8 mm light probe, 1 Anti-glare shield, 3 Anti-glare cones, Sleeves,
1 Set of Instructions for Use
Accessories
The following accessories are available for Bluephase 20i:
REF Description
627389
Light probe 10>8 mm, black (G2)
608538 Pin-point light probe 6/2 mm, black (G2)
551756 Anti-glare cones
592496 Anti-glare shield
627299 Bluephase 20i charging base (G2)
627300 Bluephase 20i battery (G2)
627298 Bluephase 20i handpiece (G2)
607922 Bluephase Meter
608554 Bluephase sleeves (G2)
Technical data
Operating voltage charging base 5 VDC
Operating voltage handpiece
3.7 VDC with battery
5 VDC with power pack
Power Pack 100-240 VAC / 50-60 Hz /
max. 0.4 A / Output 5 VDC
TYPE 15.2630
Manufacturer: Friwo
Operating conditions
Temperature
+10 °C to +35 °C (+50 to +95°F)
Relative humidity 30 % to 75%
Ambient pressure 700 hPa to 1060 hPa
Dimensions of the charging base L=205mm; W=150mm; H=85mm
Weight of the charging base
250 g
Charging time approx. 2 h (with the battery empty)
Power supply of the handpiece Li-Po battery
Max. battery time
approx. 45 min.
(with a new, fully charged battery)
Light source Polywave ® LED
Wavelength range 385–515 nm
LED-Class 2 LED LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LED PRODUCT
Max. 5.11 mW / Wavelength 385 - 515 nm
Light intensity 2,000 - 2,200 mW/cm 2
Operation 5 min. on / 6 min. off (intermittently)
Dimensions of the handpiece L=260mm; W=42mm; H=120mm
Weight of the handpiece (incl. battery) 225 g
Transportation and storage conditions:
Temperature
-20 °C to +60 °C (-4 to 140°F)
Relative humidity 10% to 75%
Ambient pressure 500 hPa to 1060 hPa
Bluephase 20i has to be stored in closed, roofed rooms.
Protect the device from severe jarring.
Battery
– Do not store at temperatures above 40 °C / 104 °F (or 60 °C / 140 °F for a
short period). Recommended storage temperature 15-30 °C (59-86 °F).
– Always store the battery charged and
– not for longer than 6 months.