Marantz NR1603 - Manual (Page 119)

116
Inputs
Source Level
Default settings are underlined.
• This function corrects the playback level of the selected input source’s audio input.
• Make this setting if there are differences in the input volume levels between the different sources.
Setting details
–12dB – +12dB (0dB)
The analog input level and digital input level can be adjusted independently for input sources for
which “DIGITAL” is assigned at “Input Assign” ( vpage 114 ).
Input Select
Default settings are underlined.
Set the audio input mode and decode mode of each input source.
The input modes available for selection may vary depending on the input source.
Setting items Setting details
Input Mode
Set the audio input modes
for the different input
sources.
It is normally recommended
to set the audio input mode
to “Auto”. Auto : Automatically detect input signal and perform playback.
HDMI : Play only signals from HDMI input.
Digital : Play only signals from digital input.
Analog : Play only signals from analog input.
• “Digital” can be set for input sources for which “DIGITAL” is assigned
at “Input Assign” ( vpage 115 ).
• If the input source is set to “CBL/SAT”, “Blu-ray” or “CD”, it can be set
to “Analog”.
• When digital signals are properly input, the indicator lights on
the display. If the indicator does not light, check “Input Assign”
( vpage 115 ) and the connections.
• If “HDMI Control” is set to “On” and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose
input source is “TV” is fixed to ARC.
Setting items Setting details
Decode Mode
Set the audio decode mode
for input source.
CBL/SAT DVD
Blu-ray GAME
AUX MEDIA PLAYER
CD TV AUDIO
Auto : Detect type of digital input signal and decode and play automatically.
PCM : Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.
• This item can be set for input sources for which “DIGITAL” is assigned
at “Input Assign” ( vpage 114 ).
• Normally set this mode to “Auto”. Set “PCM” and “DTS” when
inputting the corresponding input signal.
Video Source
Default settings are underlined.
Video of another input source is played back combined with the playing audio.
Setting details
Default : Play the picture and sound of the input source.
CBL/SAT / DVD / Blu-ray / GAME / AUX / MEDIA PLAYER / TV AUDIO / CD : Select video input source
to view. The video of the selected input source is played along with the audio currently being played. This
can be set for individual input sources.
“GAME”, “AUX”, “MEDIA PLAYER”, “TV AUDIO” or “CD” can be selected only when “COMP” is
assigned to the input source.
NOTE
• It is not possible to select HDMI input signals.
• Input sources for which “Hide” is selected at “Hide Sources” (
vpage 115 ) cannot be selected.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
A
dv
anced v
ersion
DVD