Marantz NR1603 - Manual (Page 33)

30
Parameter Check
This function enables you to check the measurement results and equalizer characteristics after Audyssey®
Setup.
1
Use ui to select “Parameter Check” and then press ENTER .
Audyssey Setup
Amp Assign
Channel Select
Parameter Check
Start
Your AV receiver can automatically measure the acoustics of
your room then optimize your speakers using the included
microphone.
Set the following items
if necessary.
Audyssey Setup/Parameter Check
Distances
Levels
Crossovers
Speaker Config.
Equalizers
Restore...
Check Audyssey Setup Measurement results.
2
Use ui to select the item you want to check, then press ENTER .
Measurement results for each speaker are displayed.
Speaker Config. Check the speaker configuration.
Distances Check the speaker distance.
Levels Check the speaker channel level.
Crossovers Check the speaker crossover frequency.
Equalizers Check the equalizer.
• If “Equalizers” is selected, press ui to select equalizing curve (“Audyssey” or “Audyssey Flat”) to
be checked.
Use
ui to switch the display between the different speakers.
3
Press o or BACK .
The confirmation screen reappears. Repeat step 2.
Retrieving Audyssey® Setup settings
If you set “Restore...” to “Yes”, you can return to Audyssey® Setup measurement result (value calculated
at the start by MultEQ®) even when you have changed each setting manually.
Set up speakers (Audyssey® Setup) Making the network settings
(Network)
This unit can be connected to a home network (LAN) to listen to Internet radio or play back music files and
still image (JPEG) files stored on a computer.
1 Connect the Ethernet cable ( v page 22 “Connecting to a home network (LAN)”).
2
Turn on this unit ( v page 31 ).
This unit performs automatic network setup due to the DHCP function.
When connecting to a network that has no DHCP function, perform the setting in “Settings”
(
vpage 123 ).
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
Basic v
ersion
DVD