Marantz NR1603 - Manual (Page 34)

31
Playback (Basic operation)
Setup ( vpage 24 )
n Turning the power on ( vpage 31 )
n Selecting the input source ( vpage 31 )
n Adjusting the master volume ( vpage 32 )
n Turning off the sound temporarily ( vpage 32 )
n Playing a Blu-ray Disc player/DVD player
( vpage 32 )
n Playing a CD player ( vpage 32 )
n Playing an iPod ( vpage 33 )
n Playing a USB memory device ( vpage 36 )
n Listening to FM broadcasts ( vpage 39 )
n Listening to internet radio ( vpage 47 )
n Playing back files stored on a PC and NAS
( vpage 50 )
n Using online services ( vpage 54 )
n Convenient functions ( vpage 62 )
n AirPlay function ( vpage 66 )
Selecting a listening mode (Sound Mode)
( vpage 68 )
Playback (Advanced operation) ( vpage 88 )
Important information
Before starting playback, make the connections between the different
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.
Turning the power on
Press POWER X to turn on power to
the unit.
The power turns on.
You can also switch the power to standby by pressing X ON/
STANDBY on the main unit.
n When power is switched to standby
Press POWER X .
GSTANDBY indicator status in standby modeH
• Normal standby : Red
• When “HDMI Control” (
vpage 109 ) is set to “On” : Orange
• When “IP Control” ( vpage 122 ) is set to “Always On” :
Orange
Selecting the input source
Press the input source select button
( CBL/SAT , DVD , Blu-ray , GAME ,
AUX , MEDIA PLAYER , TV AUDIO ,
CD , TUNER , iPod/USB , M-XPort ,
NETWORK or INTERNET RADIO ) to
be played back.
The desired input source can be selected
directly.
You can also use the following operation to select an input
source.
n Select the input source using the main unit
Turn INPUT SELECTOR .
• Turning INPUT SELECTOR switches the input source, as shown
below.
GAME AUX MEDIA PLAYER
iPod/USB FM M-XPort NETWORK CD TV AUDIO
Blu-ray DVD CBL/SAT
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
Basic v
ersion
DVD