Preparation – Marantz NR1603 User Manual

Page 28

Advertising
background image

25

2

Set up the subwoofer

If using a subwoofer capable of the following

adjustments, set up the subwoofer as shown below.

For details, see your subwoofer’s manual.

n When using a subwoofer with a direct mode

Set the direct mode to “On” and disable the volume adjustment
and crossover frequency setting.

n When using a subwoofer without a direct mode

Make the following settings:

Volume : “12 o’clock position”
Crossover frequency : “Maximum/Highest Frequency”
Low pass filter : “Off”
Standby mode : “Off”

3

Set up the remote control unit

n Set up the zone mode

Press

MAIN

to switch the zone mode to the MAIN

ZONE.

MAIN

lights.

Press MAIN

1

Prepare the included setup microphone

Mount the setup microphone on a tripod or stand

and place it in the main listening position.

When placing the setup microphone, adjust the height of the
sound receptor to the level of the listener’s ear.

Sound receptor

Setup microphone

If you do not have a tripod or stand, set up the microphone on, for
example, a seat without a back.

NOTE

• Do not hold the setup microphone in your hand during

measurements.

• Avoid placing the setup microphone close to a seat back or wall as

sound reflections may give inaccurate results.

Set up speakers (Audyssey® Setup)

4

Connect the setup microphone to the SETUP MIC

jack of this unit.

Audyssey Setup

Amp Assign

Channel Select

Start

Your AV receiver can automatically measure the acoustics of

your room then optimize your speakers using the included

microphone.

Set the following items

if necessary.

When the setup microphone is
connected, the following screen is
displayed.

• Here, we explain setup using the example of 7.1-channel speaker

playback using surround back speakers.
For setup of surround back speaker systems other than
7.1-channels, follows steps 3 to 6 in “Set up “Amp Assign””
(

vpage 85

).

If unused channels are set with “Channel Select”, measuring time
can be shortened. For setting, perform steps 7 to 12 of “Set up
“Channel Select”” (

vpage 86

).

Preparation

Basic v

ersion

A

dv

anced v

ersion

Inf
or

mations

Basic v

ersion

v See overleaf

DVD

Advertising