Marantz NR1603 - Manual (Page 130)

127
Front Display
Default settings are underlined.
Adjust the display brightness of this unit.
Setting items Setting details
Display On : Display is always on.
Auto OFF : Display is off except when showing the status display.
Off : Display is always off.
This can also be set by pressing DISPLAY on the main unit.
Each time DISPLAY is pressed, the setting is changed as shown
below.
On Auto Off
Off
NOTE
When “Display” is set to “Off”, the display turns off and appears as if
there is no electricity.
Information
Show information about receiver settings, input signals, etc.
Items Setting details
Audio
Show information about
audio input signals. Sound Mode : The currently set surround mode.
Input Signal : The input signal type.
Format : The number of input signal channels (presence of front, surround,
LFE).
Sample Rate : The input signal’s sampling frequency.
Offset : The dialogue normalization correction value.
Flag : This is displayed when inputting signals including a surround back
channel. “MATRIX” is displayed with Dolby Digital EX and DTS-ES Matrix
signals, “DISCRETE” with DTS-ES Discrete signals.
Dialogue normalization function
This function is automatically activated when playing Dolby Digital
sources.
It automatically corrects the standard signal level for individual program
sources.
The correction value can be checked using the
STATUS on the main unit.
Offset: - 4dB
The figure is the corrected value. This cannot be changed.
Video
Show information about
HDMI input/output signals
and monitor. Signal
• Resolution / Color Space / Pixel Depth
Monitor
• Interface / Resolutions
General
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
A
dv
anced v
ersion
v See overleaf
DVD