Marantz NR1603 - Manual (Page 35)

32
Adjusting the master volume
Use VOLUME df to adjust the
volume.
• The volume display method varies
depending on the “Scale” setting
(
vpage 105 ).
n When the “Scale” setting
( vpage 105 ) is “0 – 98”
GAdjustable rangeH 0.0 0.5 – 98.0
n When the “Scale” setting ( vpage 105 ) is “–79.5dB –
18.0dB”
GAdjustable rangeH – – –.– –79.5dB – 18.0dB
• The variable range differs according to the input signal and channel
level setting.
You can also adjust the master volume by turning VOLUME on the
main unit.
Turning off the sound temporarily
Press MUTE : .
• “MUTE” indicator on the display flashes.
•
: appears on a TV screen.
• The sound is reduced to the level set at “Mute Level” ( vpage 105 ).
• To cancel, press MUTE : again. Muting can also be canceled by
adjusting the master volume.
Important information Playing a Blu-ray Disc player/DVD
player
The following describes the procedure for playing Blu-ray Disc player/
DVD player.
1 Prepare for playback.
q Turn on the power of the TV,
subwoofer and player.
w Change the TV input to the input of
this unit.
e Load the disc in the player.
2
Press POWER X to turn on power
to the unit.
3
Press Blu-ray or DVD to switch an input source for a
player used for playback.
4 Play the Blu-ray Disc player or DVD player.
• Make the necessary settings on the player (language setting,
subtitles setting, etc.) beforehand.
Playing a CD player
The following describes the procedure for playing CD player.
1 Prepare for playback.
q Turn on the power of the subwoofer
and player.
w Load the disc in the player.
2
Press POWER X to turn on power
to the unit.
3
Press CD to switch the input
source to “CD”.
4 Play the CD player.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
Basic v
ersion
DVD