Marantz SR4001 User Manual
Page 32
29
ENGLISH
8 MULTI ROOM (SR5001 only)
SR5001 has features in MULTI ROOM SYSTEM
such as source selector, sleep timer, Multi Room
Speaker output and remote control.
You can set these feature in this sub-menu.
8 MULTI ROOM
AUDIO : DVD
SLEEP TIMER : OFF
MULTI:OUT : STEREO
MULTI:OFF MSPK :
VOL : VARI
LEVEL : -90dB
--- MAIN ROOM STATUS ---
VIDEO:DVD AUDIO:DVD
MAIN
EXIT
1.
Select
“
MULTI ROOM
” in the SETUP MAIN
MENU with
3
or
4
cursor button, and press the
ENTER
button.
2.
To Select desired contents, press
3
or
4
cursor
button
AUDIO:
Select the audio source of the Multi-room output
with
1
or
2
cursor buttons.
SLEEP TIMER:
SLEEP timer function is available during the
multiroom is active, set the time with
1
or
2
cursor
buttons.
MULTI OUT:
To switch MULTI and MSPK outputs to either
STEREO or MONO, press
1
or
2
cursor button.
MULTI (MULTI ROOM):
To switch on the Multi-room output ON or OFF,
press
1
or
2
cursor button.
VOL (VOLUME SETUP):
Select whether the Multi-room output level is
variable or fi xed with a
1
or
2
cursor buttons.
LEVEL (VOLUME LEVEL):
Adjust the Multi-room output level with
1
or
2
cursor buttons.
MSPK B (MULTI SPEAKER B):
To switch on the Multi-speaker B output ON or
OFF, press
1
or
2
cursor buttons.
Note:
This setting can be changed when the Surr Back is set
“NONE” in 2-1 SPEAKER SIZE menu. When this
setting is unavailable, “
✽✽✽” is displayed
VOL (VOLUME SETUP):
Select whether the Multi-speaker output level is
variable or fi xed with a
1
or
2
cursor buttons.
Note:
This setting can be changed when the Surr Back is set
“NONE” in 2-1 SPEAKER SIZE menu. When this
setting is unavailable, “
✽✽✽” is displayed
7 7.1 CH INPUT LEVEL
This sub-menu is to adjust the speaker levels for 7.1-
channel input sources.
Here you will adjust the volume for each channel so
that they are all heard by the listener at the same
level.
7 7.1 CH. INPUT LEVEL
VIDEO-IN : LAST
FRONT L : 0 dB
CENTER : 0 dB
FRONT R : 0 dB
SURR.R : 0 dB
SURR.B R : 0 dB
SURR.B L : 0 dB
SURR.L : 0 dB
SUB W : 0 dB
MAIN EXIT
1.
Select
“
7.1CH INPUT
” in the SETUP MAIN
MENU with the
3
or
4
cursor buttons, and
press the
ENTER
button.
2.
To select “
VIDEO IN
”, press
3
or
4
cursor
button.
3.
Using
the
1
or
2
cursor buttons, select the
video input source which is emitted from
Monitor out in the 7.1 CH INPUT function.
The input source is switched by pressing the
1
or
2
cursor buttons as follows;
LAST
↔
TV
↔
DVD
↔
VCR1
↔
DSS
↔
AUX1
↔
V-OFF
↔
LAST
↔
Notes:
• When select LAST, the source is set previous source
before 7.1 CH INPUT function is activated.
• When select V-OFF, no signal is emitted from monitor
out terminal.
4.
To Select desired channel , press the
3
or
4
cursor buttons.
5.
Using
the
1
or
2
cursor buttons, adjust the
volume level of each channel.
6.
After you complete this portion of the set up,
move the cursor to “
MAIN
” with the
3
or
4
cursor buttons and press the
ENTER
button.
Notes:
• These settings will be memorized to 7.1CH INPUT
source.
• This feature can be directly selected with the
CH.SEL button of the remote controller.
LEVEL (VOLUME LEVEL):
Adjust the Multi-speaker output level with
1
or
2
cursor button.
Note:
This setting can be changed when the Surr Back is set
“NONE” in 2-1 SPEAKER SIZE menu. When this
setting is unavailable, “
✽✽✽” is displayed
MAIN ROOM STATUS:
Selected input source in the main room will be
displayed.
Note:
If “VOLUME” is set to “FIXED”, the multi-room
output level cannot be adjusted from the second zone.
After you complete this portion of the set up, move
the cursor to “
MAIN
” with
3
or
4
cursor buttons and
press
ENTER
button.