Marantz SR4001 - Manual (Page 49)

46
ENGLISH
MULTI ROOM
SYSTEM
(SR5001 only)
The Multi Room system is a function which allows
you to listen to the same or a different source in a
room other than the room in which the SR5001 is
located.
To use this function, a multi room remote unit and
remote control signal receiver available from your
Marantz dealer are necessary.
The operations possible with the multi room function
are explained briefl y below.
For details, refer to the instruction manual supplied
with the multi room remote control unit and receiver.
When the outputs of the MULTI OUT terminals are
wired and connected to amplifi ers installed in other
rooms or M (MULTI) SPEAKER B terminals are
wired and connected to L&R speakers in other room,
different sources can be played in rooms other than
the main room in which this unit and the playback
devices are installed.
SR5001 has some feature to MULTI ROOM SYSTEM
as source selector, sleep timer, Multi Room Speaker
output and remote control.
MULTI ROOM PLAYBACK USING THE MULTI
ROOM OUT TERMINALS
The SR5001 is equipped with audio pre-out terminals
for which the volume is adjustable as the MULTI
output terminals.
A separately sold stereo power amplifier can be
connected to enjoy multi room playback.
The MULTI OUT system can not be operated with the
supplied remote controller.
MULTI SPEAKER
DIGITAL R L VIDEO S-VIDEO AUX 1 INPUT AUDIO
SETUP SIMPLE MULTI PURE
T-MODE
SURROUND MEMORY DISPLAY ATT MUTE
STANDBY
PHONES POWER ON/STANDBY
INPUT SELECTOR VOLUME
UP DOWN
AV SURROUND RECEIVER SR5001
DIRECT
AUTO HT-EQ EXIT MENU
MODE
BAND
CLEAR
ENTER
2. 2. 1.
1. Press the MULTI button. The unit enters multi
room mode and the display indicates “ SELCT
SOURCE ” and fl ashes the “ MULTI ” indicator
for approx. 10 seconds.
2. In this time, you can select the input source by
turning the input selector knob.
Then, the display indicates “ MULTI VOLUME ”
“ MULTI VOL. xx ” for approx. 5 seconds.
3. During this time, you can set the volume level
in the multi room as desired.
This will only set the volume in the second
room.
MULTI ROOM PLAYBACK USING THE MULTI
SPEAKER TERMINALS
The SR5001 allows you to connect another set
of speakers and place them in a different room or
separated area for listening to music.
The MULTI ROOM SPEAKER system can not be
operated with the supplied remote controller.
MULTI SPEAKER
DIGITAL R L VIDEO S-VIDEO AUX 1 INPUT AUDIO
SETUP SIMPLE MULTI PURE
T-MODE
SURROUND MEMORY DISPLAY ATT MUTE
STANDBY
PHONES POWER ON/STANDBY
INPUT SELECTOR VOLUME
UP DOWN
AV SURROUND RECEIVER SR5001
DIRECT
AUTO HT-EQ EXIT MENU
MODE
BAND
CLEAR
ENTER
2. 2. 1.
1. Press the MULTI SPEAKER button. The
unit enters multi room speaker mode and
the display indicates “
SELCT SOURCE ” and
fl ashes the “ MULTI ” indicators for approx. 10
seconds.
2. In this time, you can select the input source by
turning the input selector knob.
3. Then, the display indicates “ MSPKR VOLUME ”
“ MSPKR VOL.–18 ” for approx. 5 seconds.
During this time, you can set the volume level
in the multi room as desired.
This will only set the volume in the multi room.
Notes for MULTI ROOM SPEAKER
• MULTI ROOM SPEAKER On/ Off is available in
main room only.
• MULTI ROOM SPEAKER output terminals can
be used when the SURROUND BACK SPEAKER
is set NONE in SPEAKER SETUP menu. (See
SPEAKER SETUP, page 26)
• “The Surr. Back Speakers are in use” is displayed
by pressing the MULTI SPEAKER button when
the SURROUND BACK SPEAKER is set except
NONE in SPEAKER SETUP menu. (See SPEAKER
SETUP, page 26)
• Multi room operations cannot be performed from the
remote controller.