Factory default settings, Figure 10: starutil nmea message list – NavCom SF-2040 Rev.F User Manual
Page 50
Advertising
SF-2040 User Guide – Rev. F
Factory Default Settings
COM1
9 Configuration - Data port
9 Rate – 19.2Kbps
9 Output of NMEA messages GGA & VTG
scheduled @ 1Hz rate
Though the output rate defaults to
1Hz, the data output rate can be
changed to On Change. Making this
selection in the NMEA output list will
better reflect the navigation rate
selected in the Rover Setup screen.
Figure 10: StarUtil NMEA Message List
4-48
Advertising