NavCom SF-2040 Rev.F - Manual (Page 55)

SF-2040 User Guide – Rev. F
Chapter 5 .................... Safety Instructions
The SF-2040 GPS sensor is designed for precise
navigation and positioning using the Global
Positioning System. Users must be familiar with the
use of portable GPS equipment, the limitations
thereof and these safety instructions prior to use of
this equipment.
Transport
Always carry the NavCom equipment in its case. The
case must be secured during transport to minimize
shock and vibration.
Utilize all original packaging when transporting via
rail, ship, or air.
Maintenance
The NavCom equipment may be cleaned using a new
lint free cloth moistened with pure alcohol.
Connectors must be inspected, and if necessary
cleaned before use. Always use the provided
connector protective caps to minimize moisture and
dirt ingress.
Inspect cables regularly for kinks and cuts as these
may cause interference and equipment failure.
Damp equipment must be dried at a temperature less
than +40
°C (104°F), but greater than 5°C (41°F) at
the earliest opportunity.
External Power Source
If the SF-2040 is used with the optional external
power cable (P/N 94-310060-3010), it must be
connected to the chosen external power solution in
accordance with Chapter 2 Interfacing\Electrical
Power. It is important that the external power source
5-53