NavCom RT-3020 Rev.D - Manual (Page 26)

RT-3020 User Guide - Rev. E
GPS Sensor
The RT-3020 GPS sensor can be mounted to a flat
surface using four screws spaced as per the following
diagram of the base plate. In environments with high
vibration, shock absorbers suitable for 1.8kg (4lbs)
should be considered.
Figure 7: RT-3020 Base Plate Dimensions
The RT-3020S can be installed in a backpack for mobile
surveying applications.
The sensor should not be placed in a confined space or
where it may be exposed to excessive heat, moisture, or
humidity.
‡
There are no user serviceable parts inside the RT-3020
GPS sensor. Undoing the four screws, which secure the
front end plate, and the four securing the rear end plate
will void the equipment warranty.
3-24