NavCom RT-3020 Rev.D - Manual (Page 28)

RT-3020 User Guide - Rev. E
When setting up the reference sensor, it is best to have
the
reference station sensor elevated above the roving
sensors since radio signals of such high frequency tend
to travel a shorter distance than their lower frequency
counterparts, and are apt not to penetrate obstructions
as well over distance. This also affords the reference
sensor to transmit to all
rove s in all directions with
minimal obstruction. Figure 8 & 9 illustrates a proper
and improper
RTK reference station installation.
r
Figure 8: Good Line of Sight RTK setu p
Figure 9: Poor Line of Sight RTK setup
3-26