NavCom NCT-2030M Rev.C - Manual (Page 15)

NCT-2030M User Guide - Rev. C
Chapter 2 Interfacing
This chapter details the NCT-2030M GPS sensor connectors
and status display, appropriate sources of electrical power,
and how to interface the communication ports.
Electrical Power
Electrical power is input thru a 4-pin LEMO female connector
located on the front panel of the NCT-2030, and labeled ‘DC
PWR.’ The pin designations are shown in Table 1; see Figure
2 for pin rotation on unit.
Pin Description
1
2
Return
3
4
Power Input 10 to 30 VDC
Table 1: External Power Cable Pin-Out
‡
Pins 1 and 2 are connected together inside the NCT-2030M
GPS sensor. Pins 3 and 4 are connected together inside the
GPS sensor.
2-13