NavCom NCT-2030M Rev.C - Manual (Page 20)

NCT-2030M User Guide - Rev. C
To power the unit on or off, the on/off (I/O) switch must be
depressed for more than 3 seconds. During power up of the
GPS sensor, all LEDs will be on for a period of 3-5 seconds.
„
Link LEDs
LINK Status
The LINK LEDs are not utilized in the
NCT-2030M
GPS sensor
(Enabled when receiver upgraded to either
RT-3020M or NCT-2030M)
Table 3: Link Light Indication
„
Base LEDs
BASE Status
The BASE LEDs are not utilized in the
NCT-2030M
GPS sensor
(Enabled when receiver upgraded to either
RT-3020M or NCT-2030M)
Table 4: Base station Indication
2-18