NavCom NCT-2030M Rev.C - Manual (Page 26)

NCT-2030M User Guide - Rev. C
Figure 7: NCT-2030M Base Plate Dimensions
GPS Sensor
The NCT-2030M GPS sensor can be mounted to a flat
surface using the four screw slots shown in Figure 7. In
environments with high vibration, shock absorbers
suitable for 1.8kg (4lbs.) should be considered.
The NCT-2030M can be installed in a backpack for
mobile surveying applications.
The sensor should not be placed in a confined space or
where it may be exposed to excessive heat, moisture, or
humidity.
‡
There are no user serviceable parts inside the NCT-
2030M GPS sensor. Undoing the four screws, which
secure the front end plate, and the four securing the
rear end plate will void the equipment warranty.
3-24