Orion System MODGAS-X - Manual (Page 16)

LCD DISPLAY SCREENS
MODGAS-X Field Technical Guide 16
Main Screens Map and MODGAS Screens
Main Screens Map
Refer to the following map when navigating through the LCD Main
Screens. The fi rst screen is an initialization screen. To scroll through
the rest of the screens, press the
<MENU> button.
MODGAS
STATUS
ALARMS
SETPOINT
FORCE
VALVES
Press to scroll through STATUS Screens.
Press to scroll through FORCE Screens.
Press to go to ALARMS Screens.
Press to go to SETPOINTS Screens.
Press to go to FORCE Screens.
Press to go to STATUS Screens.
Press to scroll through MODGAS Screens.
Main MODGAS Screens
Refer to the following map when navigating through the Main
Screens. From the MODGAS Screen, press
<ENTER> to scroll
through the screens.
MODGAS
S/A MODE,
S/A MODE LOCKED
or COMM MODE
SOFTWARE
1044 V.XXX
CURRENT SOFTWARE VERSION
In Stand-Alone Mode, the screen will display S/A MODE or S/A MODE
LOCKED.
In Communications Mode, the screen will display COMM MODE and the
items below will scroll through the screen:
1. Number of good packets being received. This will roll over after 9999.
Example: +XXXX.
2. Number of checksum errors. This will stop at 9999. Example: C-XXXX
3. Number of packet length errors. This will stop at 9999 until power is
cycled. Example: P-XXXX.
4. Number of initialization errors if communication is I 2 C.
Example: I-XXXX.
Press to scroll through SETPOINTS Screens.
Alarms will display automatically.
Revised 9/30/14
ADDRESS
1 (138)
CURRENT BOARD ADDRESS
Number in parentheses is E-BUS address.
# STAGES
T=2 M=2
NUMBER OF STAGES CONFIGURED
T = Total stages fi xed and modulating
M = Total modulating stages