Remotec ZRC-100 V1.53 - Manual (Page 33)

33
4
Select “Add Assoc.＂
and press key.
5
Assign an “Assoc. ID＂
(e.g. 001) by using
cdkeys to change your
number and ef keys to
select number position.
Press key to save
the settings.
⇓
6
Press the program/EP
button on the secondary
device (e.g. light switch)
⇓
7
Press the program/EP
button on the primary
device (e.g. door sensor)
=> It will turn on the
light switch when the
door is open.
Config. Assoc.
Add Assoc. >
Remove Assoc. >
Delete Assoc. >
OK to Enter
Add Assoc.
Assoc. ID (1-255)
000
OK to Save
Add Assoc.
Assoc. ID (1-255)
001
OK to Save
Add Assoc.
Press PROG on Sec.
>>>>
Add Assoc.
Press PROG on Sec.
>>>>
OK
Add Assoc.
Press PROG on Pri.
>>>>
e.g. light switch
e.g. light switch
e.g. door sensor