Remotec ZRC-100 V1.47 - Manual (Page 17)

17
Note 1: Your target device must be included in the network before this
setup procedure, please refer to [Adding Device to the Network]
section.
Note 2: If no ACK signal received for more than 60 seconds, the “Add
Device” mode will exit automatically.
Removing Device/End-point from a Scene
Step Setup Key LCD Indication
1
Press and hold
ef
keys simultaneously for
3 seconds under the
Home page.
⇓
2
Select “Remove from
Scene＂and press
key.
3
Select a Scene which
you want to delete the
device from Scene and
press key.
4
Press the program button
on the target device.
⇓
Home
Device >
Scene >
Comfort >
OK to Enter
Setup
Add Device >
Delete Device >
Add to Scene >
OK to Enter
Setup
Remove fr. Scene >
Device Config. >
Scene Config. >
OK to Enter
Select Scene
Scene 1
Scene 2
Scene 3
OK to Enter
Remove Device
Press PROG on target
>>>>