Remotec ZRC-100 V1.47 - Manual (Page 48)

48
3
Select “Listening Mode”
and press key.
4
The remote is entry the
listening mode.
(Listening mode will
automatically exit after 1
minute of inactivity.)
Note1: The mode must not be exited during communication process
with another controller. Please wait for entire communication process
to be completed.
Note2: It is not allowed to enter any user input from the remote's hard
key after entry this Mode.
Create a Secondary Controller
(Copying Network Information to a Secondary Controller)
You can add a secondary controller to your network and copy all of
your primary controller’s network information to the secondary
controller by following the steps below.
Step Setup Key LCD Indication
1
Place the two controllers
close to each other.
-
2
Press and hold cb keys
simultaneously for 3
seconds under the Home
page.
Network Setup
Rediscover N.W. >
Delete Dead Node >
OK to Enter
Home
Device >
Scene >
Comfort >
OK to Enter
Network Setup
Listening Mode >
OK to Enter
Listening Mode
Listening…
>>>>
Re-scan Devices >
Create a Sec. >
Create a Pri >