Remotec ZRC-100 V1.47 - Manual (Page 37)

37
Change Device Configuration
This function is used to modify the parameter of the Z-Wave device via
the configuration command class.
Look up the Parameter No. and Parameter Value of the target device
from the device user manual before you start the below process.
Step Setup Key LCD Indication
1
Press and hold ef keys
simultaneously for 3
seconds under the Home
page.
⇓
2
Select “Advanced
Setup＂and press
key.
3
Select
“Configuration＂and
press key.
4
Use cdkeys to change
your parameter number
and ef keys to select
number position, press
to save the setting.
Home
Device >
Scene >
Comfort >
OK to Enter
Setup
Add Device >
Delete Device >
Add to Scene >
OK to Enter
Setup
Advanced Setup >
System Settings >
About >
OK to Enter
Advanced Setup
Learning Mode
Config. Assoc. >
Configuration >
OK to Enter
Configuration
Parameter No(0-255)
000
OK to Save