Remotec ZRC-100 V1.47 - Manual (Page 29)

29
Z-Wave Advanced Setup
Learning Mode
(Replicating All Network and Device Information from a Primary
Controller to your ZRC-100)
Your ZRC-100 can:
• Copy the settings from another Z-Wave controller.
• Be included into existing Z-Wave network and act as a secondary
remote controller or back to a new primary remote controller.
• Be excluded from the Z-Wave network.
Step Setup Key LCD Indication
1
Place the two controllers
close to each other.
-
2
Press and hold ef keys
simultaneously for 3
seconds under the Home
page.
⇓
3
Select “Advanced
Setup＂and press
key.
4
Select “Learning
Mode＂and press
key.
Please make sure the
primary controller is
setup to send
information. (Refer to
Home
Device >
Scene >
Comfort >
OK to Enter
Setup
Add Device >
Delete Device >
Add to Scene >
OK to Enter
Setup
Advanced Setup >
System Settings >
About >
OK to Enter
Advanced Setup
Learning Mode
Config. Assoc. >
Configuration >
OK to Enter