Remotec Z-URC550 V1 User Manual

Page 10

Advertising
background image

10

Note2: XpressZetup

TM

cannot support “Multi-Channel Device”, please

refer to [Adding Device to the Network] and [Adding Device/End-point
to a group] for normal setup procedure.

Removing Device from a Group

Step

Setup Key

LED Indication Status

1

Press

in

XpressZetup

TM

area

• “OK" LED on
• “LED_A" flashes

rapidly

2

Select a group number
from 1 to 16 (1-8 or

1-8)

• “LED_A" off
• “LED_B" flashes

rapidly

3

Press the program button
on the target device

• “OK" LED flashes once

then turns off

• Device been removed from

the Group successfully


Note1: If the ERROR LED turns on or flashes, meaning the setup
process is failed. Please redo the process.

Note2: XpressZetup

TM

cannot support “Multi-Channel Device”, please

refer to [Removing Device/End-point from a group] for normal setup
procedure.

Note3: This process will only remove the target device from its
assigned group but will not exclude it from the network.

Removing all Devices from a Group

Step

Setup Key

LED Indication Status

1

Press and hold

in XpressZetup

TM

area

• “OK" LED on
• “LED_A" flashes

rapidly

2

Select a group number
from 1 to 16 (1-8 or

1-8)

• “LED_A" off
• “LED_B" flashes

rapidly

• “OK" LED flashes once

then turns off

• Device been deleted from

the Group successfully


Note1: If the ERROR LED turns on or flashes, meaning the setup
process is failed. Please redo the process.

Advertising