Remotec Z-URC550 V1 - Manual (Page 37)

37
Punch Through
Punch Through Channel
Punch through channel allows you to operate channel up and down
without having to switch the device modes repeatedly even when your
Z-URC
TM
550EU is in other operating modes.
To activate the punch through channel setting:
1.
Press desired Device Mode Key (e.g. TV).
2. Press and Hold "CH+" key.
3. While still holding the “CH+＂ key press desired Device Mode
Key (e.g. SAT).
4. Release "CH+＂ and the green indicator flashes once, now by
pressing the “CH+＂ key while in TV mode the remote will act
as if pressing the “CH+＂ key in SAT mode
To deactivate the punch through channel setting:
1. Press desired Device Mode Key (e.g. TV).
2. Press and Hold "CH -" key.
3. While still holding the “CH-＂ key press desired Device Mode
Key (e.g. SAT).
4. Release "CH -" (the green indicator flashes twice if the setting is
deactivated).
Punch Through Volume
Punch through volume allows you to operate volume up and down
without having to switch the device modes repeatedly even when your
Z-URC
TM
550EU is in other operating modes.
To activate the punch through volume setting:
1. Press desired Device Mode Key (e.g. TV).
2. Press and Hold "VOL+" key.
3. While still holding the “VOL+＂ key press desired Device Mode
Key (e.g. SAT).
4. Release "VOL+＂ and the green indicator flashes once, now by
pressing the “VOL+＂ key while in TV mode the remote will act
as if pressing the “VOL+＂ key in SAT mode
To deactivate the punch through volume setting:
1. Press desired Device Mode Key (e.g. TV).
2. Press and Hold "VOL -" key.
3. While still holding the “VOL-＂ key press desired Device Mode
Key (e.g. SAT).
4. Release "VOL -" (the green indicator flashes twice if the setting is
deactivated).