Remotec Z-URC550 V1 - Manual (Page 8)

8
Description of Function Keys
Keys Functions
The All-On and All-Off keys are used for turns on
or off all Z-Wave devices in the device database.
The On and Off keys are used for the different Z-
Wave groups and scenes control.
Press once to access secondary functions for the
next button. Press and hold to activate shift lock for
permanent use of shift functions. Press shift again to
release shift lock.
Note: The shift key allows you access group's shift 1
through shift 8 giving you a total of 16 groups.
The ADD and REMOVE keys are used during
XpressZetup
TM
process.
ADD key will perform two functions:
• Add a target device to Z-Wave network, also
known as INCLUSION;
• Add the device to the assigned GROUP.
REMOVE key will only remove the target device
from its assigned group but will not exclude it from
the network.
This SHIFT key is used for accessing group
numbers 9 to 16 while programming your devices.
These are your group numbers 1 through 8 and also
become group numbers 9 through 16 when
combined with the SHIFT key.
This Configuration key is used during the
ADVANCED SETUP process.
This Association key is used in conjunction with
Add, Delete or Remove keys in order to assign
association groups.
This Scene key is used in conjunction with Add,
Delete or Remove keys in order to program scenes.
This Device key is used in conjunction with Add,
Delete keys in order to include or exclude devices to
the network.
This Add key is used in the Advance Setup to:
• Add a device to the network (inclusion);
• Add a device to a group;
• Add a device to an association group;
• Add a device to a scene.
This Delete key is used in the Advance Setup to:
• Delete a device from the network (exclusion);
• Delete a group;
• Delete an association group;
• Delete a scene.